Autohex II

(0 reviews)

Autohex II Diagnostic Scan Tool has been designed to be you own technical assistant, especially in BMW cars where things were stuck before Autohex II be in market.
Now, Ecu programming and coding, Ecu replacement (including DME/DDE, CAS, FEM, BDC, EGS,…etc), Key Programming, Manual coding, and many other advanced functions became so easy and safe with our new software interface and online services.

  • Read and Erase Fault Codes
  • Individual Programming E & F Series
  • Read/Write long ISN in Bench Mode
  • Key Programming and advance coding
Order on WhatsApp

Description

Autohex II BMW Software is your best choice if you are looking for a total solution for all BMW matters you may face in BMw E/F or G series, it combines the Ecu programming, Ecu coding, Manual coding, vehicle order editor, BMW ISN Editor including the latest MDG1 Ecus, Key programming and more functions.

To know more about these special functions check Autohex II BMW Software

An example of such functions, below videos show the ease of using Autohex II.

Coverage

  • Read old ISN in BMW E series for following Ecus:D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, N73_R0,
    ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
  • Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW,
    MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
  • Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
  • Read long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
  • MDG1 Read ISN in BMW F series from following Ecus: DME_83T1, DME_841, DME_841H, DME_861, DME_88T0, DDE803.
  • MDG1 Read ISN in BMW G series from following Ecus: DME_840, DME_840H, DME_84T0, DME_860, DME_86T0, DME_88T0, DDE803P, DDE832C.
  • CAS1, CAS2, CAS3 and CAS3+ read only ISN and SK
  • Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
  • Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,…)
  • Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
  • Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
  • Read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the Ecu.
  • Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported Ecu List).
  • Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
  • Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool.
  • Modify KOMBI Mileage by HexTag tool.
  • Renew all BMW keys, and many other brands by HexTag tool.

0.0 Average Rating Rated (0 Reviews)

Rated
0%
Rated
0%
Rated
0%
Rated
0%
Rated
0%

Be the first to review “Autohex II”

Your email address will not be published. Required fields are marked *

You have to login to add images.