facebook

Autel New MaxiSys MS919 Diagnostic Tool and Measurement System with Advanced VCMI

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
maxisys-ms919

Autel MaxiSys MS919

The latest MaxiSys MS919 shares exactly the very same software application and also multi-purpose VCMI as the MaxiSys Ultra, but the analysis tablet is without the docking terminal, has a smaller sized display and smaller sized memory.

The great thing about the  MaxiSys MS919 represents exceptional value for cash, preserving all the software program and VCMI functions of the MaxiSys Ultra

The MaxiSys 919 incorporates diagnostics, solution, considerable live data, network coding, and ECU re-flashing. The MS919 has MaxiFLASH VCMI with an integrated Oscilloscope, Multimeter, Signal Generator, and also OBD Bus Examine Features, and links to the Ultra utilizing Wi-fi, so significantly raising the communication speeds. The all-new VCMI additionally has actually Enhanced Protocol Compatibility and sustains D-PDU, RP1210, CANFD. J2534 and DoIP procedures.

The MaxiSys MS919 has all new software professional abilities that we have named Repair Assistance, DTC Analysis, Topology Mapping, and Relevant Cases.

can-bus-check-2

MaxiSys MS919 Features:

✅ Extended 2 years warranty
✅ 2-years Software free updates included (Automax Tools Customer’s Only)
✅ 80+ Manufacturers (Vehicle Coverage)
✅ Full diagnostics
✅ 26 Service Functions
✅ Channel coding and programming
✅ MaxiFlash VCMI included
✅ Built-In Oscilloscope
✅ Built-In Waveform Generator
✅ Built-In Multimeter
✅ Built-In CAN bus Check

oscilliscope-01

✅ Oscilloscope – The 4 Channel Oscilloscope of MaxiSys MS919 is faster with 20MHz Bandwidth, more accurate with 80MS/s sampling data rate, and a 32M memory buffer that stores more complex signals, zoom and replay.

✅ MaxiSys MS919 pre-set Guided Test and Waveform Library instructs technician’s on use and fault analysis We also provide a large number of cloud preset cases, including connection diagrams, waveform library, reference waveforms, fault case analysis and one-press waveform settings.

waveform

Waveform Generator – The Waveform Generator of MaxiSys MS919 is used to test a sensor, an actuator, or an ECU without the need to replace them one by one to identify the fault. This is done by simulating signals of various sensors and ECUs, identifying hardware issues.

✅ Simulates sensor signals to quickly diagnose ECU, sensor, and wiring harness issues;

✅ Simulates ECU signals to perform active tests to verify functions of certain parts (Electronic fan, solenoid valves etc);

Simulates actuator signals and verifies the communication status between the actuator and ECU (Electronic fan, solenoid valve, headlight)

multimeter

✅ Multimeter – The professional Multimeter will measure Voltage, Current, Resistance, Diode, Frequency/Period, Duty Cycle, Connectivity and Pulse Width.

✅ CAN Bus Check – The CAN Bus Check of MaxiSys MS919 can quickly determine whether the OBD pins are functioning correctly.

✅ J2534, DoIP Bus, CAN-FD Bus, RP1210 and D-PDU – The Autel VCMI supplied with the Ultra and MS919 supports all the very latest communciation and application programming interface protocols.

Autel New MaxiSys MS919 Diagnostic Tool and Measurement System with Advanced VCMI 1

System Topology – With our Autel exclusive System Topology Software, the technician can see a color coded topology display for all vehicle systems and their status on one page!

✅ The display shows the structure of communication between modules, and gives the ability to press on a system module to display any DTC’s and access the system.

Currently available on BMW, Ford, Volkswagen, Audi, GM, Ford, Chrysler, Nissan, Honda, Toyota Lexus, Jaguar, Land Rover, Mercedes Benz, Hyundai, Kia, Volvo.

Autel New MaxiSys MS919 Diagnostic Tool and Measurement System with Advanced VCMI 2

✅ Repair Assistant – MaxiSys MS919 Repair Assist Software displays a list of recommended tests, the completion status and priority for undertaking. Very simply, the higher the priority, the earlier the components should be tested.

✅ Prioritization – The best solution path is given in priority via automatic sorting.

✅ Guided Maintenance – An integrated troubleshooting process organized into the operation steps, that guide the user to solve the maintenance problems.

Accurate recommendation – Automatically match the circuit diagram and pin position required for the fault.

✅ In the case of multiple inspection steps, you can carry out the inspection step by step, or skip unnecessary steps.

Currently available on BMW, JLR, GM, Ford, Chrysler and Porsche.

Autel New MaxiSys MS919 Diagnostic Tool and Measurement System with Advanced VCMI 3

✅ Relevant Cases – The software automatically recommends repair processes that may be relevant to the vehicle and fault. These repair cases/suggestions provide the technician with great insight when diagnosing and repairing vehicle faults.

✅ Tech Services Bulletins – See official announcements issued by vehicle manufacturers regarding common problems including vehicle modules, DTCs, repair methods, program updates and recall strategies. Currently available on Ford, GM, FCA, Toyota, Lexus, VW, Nissan, Honda, BMW, Mercedes, Audi, Hyundai, Kia.

✅ DTC Analysis – The DTC Analysis describes possible causes and solutions for vehicle faults. Currently available on GM, Ford, Toyota, Lexus, Nissan, Honda, VW, Audi, BMW, FCA, Mercedes.

Scroll to Top
Cart
  • No products in the cart.